Skip to main content
Illustrative composite repair wrap, not manufacturer photography or confirmed stock colour
Product image01 / 04

FiberFix · water-activated composite repair

FiberFix Structural Repair Wrap

Give a compatible rigid part a considered second life. FiberFix is a water-activated fibreglass composite wrap that cures into a rigid outer shell — a different repair approach from ordinary sticky tape. Supplied as one 50 mm × 5 m roll, it brings a wrap-around repair concept to home, marine and maintenance work.

FiberFix · standard · Fibreglass composite wrap

Choose your format

50 mm x 5 mSKU 000096-01

Illustrative product appearance. Confirm the supplied article and its current repair instructions before use.

Technical information

A closer look

Wrap the damage. Rethink replacement.

A cracked vacuum wand need not send the whole appliance to the replacement pile. A damaged tool handle can deserve a closer look. FiberFix starts flexible so it can wrap around a prepared part, then cures into a rigid composite shell. The difference is in what the wrap becomes: not a temporary sticky covering, but a hard outer repair layer. Start with a suitable component and plan the repair around its material, shape and intended use.

  • Water-activated repair
  • Fibreglass composite wrap
  • Cures into a rigid shell
  • One 50 mm × 5 m roll
Illustrative removed rigid vacuum wand with a cured composite outer shell

What the wrap becomes

Flexible to wrap. Rigid after cure.

Fibreglass reinforcement and a water-activated composite system work together to form the repair shell. Overlapping layers build the covering around the prepared component; curing changes the wrap from a workable material into a rigid outer layer. This is not pressure-sensitive duct tape or a stretchy self-fusing rubber wrap.

Water activates the repair
Prepare the component and use the supplied article’s activation and working instructions before wrapping.
Reinforcement follows the part
A wrap-around format brings the fibreglass composite around a suitable rigid component rather than simply covering one face.
A different finish
The cured shell is rigid. Assess the repaired part and its intended duty before putting it back into use.
Illustrative flexible fibreglass composite wrap and rigid cured shell
Material illustration, not a measured cross-section or confirmed stock colour.

Application contexts

Six settings. More reasons to consider repair.

From a boat-cleaning brush to a workshop sample, explore six distinct repair concepts across marine care, the home, industry, gardening, camping and display maintenance.

Explore applications
Marine cleaning equipment: illustrative application context

Marine cleaning equipment

Keep the focus on the kit that keeps the boat looking good. Assess a wrap-around repair on a removed deck-cleaning brush shaft at the marina workbench — a practical maintenance concept, not a repair for rigging or lifesaving equipment.

Home vacuum accessories: illustrative application context

Home vacuum accessories

Look beyond replacing the whole appliance. A cracked rigid vacuum wand offers a focused repair detail: remove the accessory, prepare the area and assess a cured outer wrap before returning the part to its intended use.

Industrial maintenance trials: illustrative application context

Industrial maintenance trials

Build a better repair assessment at the maintenance bench. A dry, isolated metal pipe spool provides a controlled external wrapping sample for checking preparation and fit — not a live leak repair or approval for pressure service.

Garden tool handles: illustrative application context

Garden tool handles

Bring the repair idea to a familiar garden tool. Explore a composite outer wrap on a removed wooden rake handle, supported on the bench. Assess the handle and its low-impact duty; this is not a striking-tool or axe repair.

Camping-kit maintenance: illustrative application context

Camping-kit maintenance

Plan the next trip with a closer look at the kit. A removed tent-pole section laid flat provides a distinct repair assessment away from wind or active loading. Check the completed part before use; climbing and safety-critical equipment are excluded.

Display-frame upkeep: illustrative application context

Display-frame upkeep

Give a decorative display detail another look before replacing the frame. Assess a wrap around a removed, supported banner-frame crossbar. Keep this concept to non-load-bearing display parts, not supports for people or equipment.

AI-generated repair concepts, not manufacturer photographs or approved installations. Confirm the exact wrap, substrate and repair instructions. Components are removed and supported; pressure, load-bearing and safety-critical performance is not implied.

Product information

Get the details
before the decision.

The construction, dimensions and product codes in one place.

Discuss the specification
Construction
Water-activated fibreglass composite wrap
Repair finish
Cures into a rigid outer shell
Listed format
One 50 mm × 5 m roll
Activation, working and cure times
Request current article-specific instructions
Pressure, strength, temperature and immersion limits
Not verified — request supplied article documentation
Product
FiberFix Structural Repair Wrap
Brand
FiberFix
Range
Standard
Product formats
50 mm x 5 m
Product variants
FormatColour / patternSKUEANPack
50 mm x 5 m—000096-013830044412746—

Documents & guidance

Information for the next step.

Get the product information and guidance that fit your application.

Good questions

Before the first application.

Have another detail to discuss? Bring it to our team.

What format is supplied?

One 50 mm × 5 m roll, SKU 000096-01, EAN 3830044412746. Confirm current availability and the instructions supplied with the article.

How is it different from duct tape?

FiberFix is a water-activated fibreglass composite that cures into a rigid shell. Ordinary pressure-sensitive tape holds by its adhesive layer; it does not become the same type of rigid repair covering.

How long do activation and curing take?

Verified activation, working and curing times are not established for this stocked article. Follow its current pack instructions. Historical FiberFix leaflets and other manufacturers’ repair-cast timings must not replace those instructions.

Can I repair a leaking pressurised pipe?

No pressure-service or live-leak approval is established here. The industrial scene is a dry, removed sample. Pressure repairs require a qualified system, engineering assessment and applicable instructions; composite wrap alone must not be assumed to seal a leak.

Are marine and outdoor uses confirmed?

The scenes illustrate removed equipment repair concepts, not immersion, weathering or structural approvals. Confirm the article’s exposure limits and assess the component before returning it to service.

What information should I request?

Ask for the exact manufacturer grade, preparation and activation instructions, working and cure times, resin-system information, substrate compatibility and any documented service limits. Colour, thickness, strength and certifications are not verified here.

Before you replace it, consider the repair.

Show us the component and explain what it needs to do. Request current FiberFix information and assess whether a composite wrap belongs in your repair kit.

Discuss your application

Talk to FasVix

Let’s assess your next repair.

Request a sample, product details or a quotation for FiberFix Structural Repair Wrap.

  • The damaged component and its material
  • The repair area, shape and intended duty
  • Exposure and any required repair approvals
  • Current article instructions and roll quantities
Find a distribution partner

Order for your business

Choose a variant to continue in the FASVIX B2B portal. Your company prices are shown after sign in.

000096-01 · 50 mm x 5 m

Register your company · Sign in