
Scotch® Super 33+ · cold-weather electrical tape
3M Super 33+ Electrical Insulation Tape
When the temperature drops, the finishing detail still matters. 3M Scotch® Super 33+ combines elastic PVC with a rubber-resin pressure-sensitive adhesive for professional electrical insulation and protective overwrapping. 3M specifies application down to −18°C. Available here in black, 19 mm × 20.1 m.
3M · premium · Electrical insulation
19 mm x 20,1 m · BlackSKU 000004-01
3M specifies cold-weather application down to −18°C. See the standard-specific operating limits below. Manufacturer product photo; packaging may vary.
Technical informationA closer look
Cold-weather confidence. A professional finish.
A cold site should not mean an ordinary finish. 3M specifies Super 33+ for application down to −18°C: its elastic vinyl backing follows contours, while the pressure-sensitive adhesive brings the contact bond. 3M also highlights resistance to weather, UV and abrasion. For properly prepared electrical joints and protective outer wraps, choose a recognised grade with clear manufacturer guidance — and a tape that belongs in the professional electrician’s kit.
- Application down to −18°C — 3M
- Elastic PVC follows contours
- Weather, UV and abrasion resistance — 3M
- Insulation and protective overwrapping

The 3M grade, explained
Flexible vinyl. A bonded finishing layer.
Thin, elastic PVC brings a conformable finish around a prepared joint or cable contour. The rubber-resin adhesive bonds on contact: this is pressure-sensitive electrical tape, not self-fusing rubber, foam or a tape with a removable release liner. 3M lists a nominal thickness of 0.18 mm; choose the wrapping system for the actual installation.
- UL 510
- 600 V · −10°C to 80°C
- CSA C22.2 No. 197
- 1000 V · −18°C to 105°C
- IEC Type 7
- −18°C to 90°C
Manufacturer listings in the February 2023 Rev J data sheet. Do not combine the maximum voltage and temperature from different standards. These are grade references, not certification of the supplied lot or a finished installation.

Application contexts
Six details in the electrician’s working day.
Cold-weather finishing, prepared joints and protective outer wraps — always as part of a correctly specified, fully isolated installation.

Cold-weather joint finishing
Finish a correctly prepared, isolated joint on a cold outdoor site. Super 33+ is specified by 3M for application down to −18°C; prepare the contact surface according to the manufacturer’s instructions, not over snow or ice.

Prepared bench connections
Give a properly connected joint a close-fitting insulating finish. Choose the connector and wrapping system first, then use the elastic vinyl to follow the prepared contour on the isolated workbench.

Assessed jacket repairs
Restore a protective outer detail where a qualified assessment permits a superficial jacket repair. The cable must be dry and disconnected; exposed conductors or damaged primary insulation require the appropriate repair system or replacement.

Connector outer protection
Add a neat protective overwrap to a suitable disconnected connector assembly. Confirm the connector, substrate and service environment; tape does not turn an unsuitable connection into a weather-rated system.

Isolated fixture maintenance
Bring a considered finishing detail to planned maintenance in a junction box. Use properly specified connectors and an appropriate enclosure, with the supply isolated and verified dead before work starts.

Rubber and mastic overwraps
Complete a professionally prepared rubber or mastic splice system with an appropriate vinyl outer wrap. Follow the exact system instructions; Super 33+ alone is not a complete high-voltage splice or universal waterproof repair.
AI-generated application illustrations, not photographs of manufacturer-approved installations. Qualified electrical work only: isolate, verify dead and follow the applicable installation and 3M instructions. Tape does not replace a suitable electrical connector or make damaged primary insulation safe by itself.
Product information
Get the details
before the decision.
The construction, dimensions and product codes in one place.
Discuss the specification- Manufacturer grade
- 3M Scotch® Super 33+
- Manufacturer construction
- Elastic PVC with rubber-resin pressure-sensitive adhesive
- Manufacturer nominal thickness
- 0.18 mm
- Minimum application temperature
- −18°C — 3M; not a universal operating range
- Electrical and thermal limits
- Standard-specific — see manufacturer data sheets and installation requirements
- Product
- 3M Super 33+ Electrical Insulation Tape
- Brand
- 3M
- Range
- Premium
- Colours / patterns
- Black
- Product formats
- 19 mm x 20,1 m
| Format | Colour / pattern | SKU | EAN | Pack |
|---|---|---|---|---|
| 19 mm x 20,1 m | Black | 000004-01 | 3830044411992 | — |
Documents & guidance
Information for the next step.
Get the product information and guidance that fit your application.
Official 3M grade references. The supplied article’s current technical documentation and the applicable installation standard remain essential.
3M Scotch® Super 33+ — official grade presentation3M Super 33+ — 19 mm × 20.1 m manufacturer listing3M technical data sheet — February 2023, Rev J3M European technical data sheet — September 2020Request current product informationTechnical resource centreGood questions
Cold application. Clear limits.
Have another detail to discuss? Bring it to our team.
Can Super 33+ be applied below freezing?
Yes. 3M specifies a minimum application temperature of −18°C for this grade. Application temperature is not the same as the installed system’s operating range. Follow the current 3M surface-preparation and installation instructions.
Does −18°C to 105°C mean one universal electrical rating?
No. 3M describes general continuous performance up to 105°C, but the listed standards have different conditions. The February 2023 Rev J data sheet lists UL 510 at 600 V and −10°C to 80°C, CSA C22.2 No. 197 at 1000 V and −18°C to 105°C, and IEC Type 7 at −18°C to 90°C. Apply the standard and system relevant to the installation, not a combined maximum.
Is this self-amalgamating tape?
No. Super 33+ is elastic PVC electrical tape with rubber-resin pressure-sensitive adhesive. Its layers bond through the adhesive; they do not self-fuse like a rubber or silicone self-amalgamating tape.
Can tape replace an electrical connector?
No. Use a suitable connector and the specified insulation system. Electrical work requires a qualified person, isolation and verification that the equipment is dead. Tape alone does not make an unsafe or damaged connection acceptable.
Which format is stocked here?
The listed article is black, 19 mm × 20.1 m, ERP code 000004-01 and EAN 3830044411992. Manufacturer photography shows the grade; packaging may vary. Request the supplied article’s current documentation before a specification-critical order.
Are the application pictures official 3M installations?
No. The main product photograph is sourced from 3M. The material and application pictures are AI-generated illustrations of working contexts, not technical instructions, certifications or evidence of an approved assembly.
Put cold-weather confidence in your electrical kit.
Tell us the installation, application temperature and standard you work to. Request Super 33+ availability and the current 3M documentation.
Talk to FasVix
Let’s specify your electrical finishing detail.
Request a sample, product details or a quotation for 3M Super 33+ Electrical Insulation Tape.
- The electrical joint or protective-wrap task
- Application temperature and service conditions
- The applicable standard and insulation system
- The required quantities and current 3M documentation


