Automotive Cloth/Fleece Wire-Harness Tape Bring the loom together before closing up.
Gather loose wires into a defined harness before the trim goes back on. This black cloth/fleece tape follows the route of the cable group and leaves a neat textile wrap.
- Give the loom a textile finish
- Bring wires into one route
- Wrap the length you need
- Keep access points clear
Give the loom a textile finish
The black cloth/fleece surface gives cable groups a consistent wrapped appearance.
Bring wires into one route
Gather adjacent wires into a manageable harness section before routing them.
Wrap the length you need
Cut from the roll and overlap the wraps along the required section.
Keep access points clear
Finish around branch points and connectors so they remain accessible.
See the cables before covering
Check the wiring beneath an old wrap before covering it again.
A neater route for grouped wiring
Electrical bench work
Group and inspect harness sections at the bench before installation.
Harness wrapping
Bring cable groups into a defined loom with overlapping textile wraps.
Dashboard wiring
Wrap selected dashboard cable groups while keeping their routing and clearance in view.
Door cable looms
Organise wiring routed through compatible door assemblies and other moving interior areas.
Electronics cable routing
Bring electronics cable groups into a defined textile-covered route.
Harness maintenance
Restore selected harness wrapping during automotive or electronics maintenance after inspection.
Application and material illustrations. See product details for the listed formats.
Cloth/fleece wrap for cable groups
Cloth/fleece carrier · Overlapping wrap application
- Cloth/fleece carrier
- Overlapping wrap application
- Cable-group organisation
- Black finish
- Cut-to-length roll format
- Keep branch points accessible
- Select for the actual installation environment
How to wrap a harness section neatly
Inspect the loom
Disconnect the relevant power supply and inspect cables and connectors before covering them.
Follow the cable route
Wrap the group consistently while leaving branch points and connectors accessible.
Check before closing
Inspect routing, movement and clearances before refitting the trim or panel.
Product details
Automotive Cloth/Fleece Wire-Harness Tape
Choose a listed format and include the reference in your enquiry.
Check availability ↗| Format | Colour | Reference |
|---|---|---|
| 19 mm x 20 m | Black | 000020-01EAN 3830044411756 |
Tell us the format, quantity and what you are working on. We will help with the next step.
The details.
Answered.
Have a different application in mind? Tell us what you are working on.
Ask FasVix ↗Where should I stop the wrap?
Leave connectors, branch points and required cable movement accessible so the harness can be installed and serviced.
Can it cover damaged wire insulation?
Repair or replace damaged wiring using the specified electrical method before wrapping the harness.
What about an engine-bay route?
Check the exact product data against the heat, fluids and exposure at that location before using it there.
Finish the routing before the trim returns.
Check the loom, choose the section to wrap and confirm the tape suits the installation environment.
