Skip to main content
A white motor yacht anchored on calm blue coastal water at sunset

MARINE ACRYLIC DOUBLE-SIDED TAPE

Built for salt.
Made to hold.

Crystal-clear mounting for the details that make a boat. Powerful adhesion. A discreet 1 mm profile. Saltwater and sunlight resistance.

CLEAR BOND. CONFIDENT FINISH.

FasVix Marine Mounting Tape original retail packaging, 8 mm × 1 mm × 3 m
Refined white yacht deck and clear blue coastal water

A refined finish, on board.

1 mmTOTAL TAPE THICKNESS
Crystal clearTRANSPARENT FINISH
−10 → +150 °CTEMPERATURE RESISTANCE
No primerDIRECT APPLICATION
Transparent tape with a red release liner beside polished marine fittings

CRYSTAL-CLEAR CONNECTION

Keep the detail.
Hide the bond.

Completely transparent tape keeps the attachment discreet on beautifully finished marine surfaces.

1 mmA slim, clear mounting profile.

The protective release liner is removed before the parts are joined.

ABOVE THE WATERLINE. INTO THE DETAILS.

The right bond for the finer details.

Explore lightweight, non-structural mounting on compatible smooth surfaces.

Decorative trims

Decorative trims

Slim metal accents and profiles on smooth topside surfaces.

Nameplates + badges

Nameplates + badges

Clean mounting of small identification plates and decorative emblems.

Cabin finishing details

Cabin finishing details

Lightweight decorative elements and carefully finished interior details.

A STRONGER FINISH STARTS HERE

More grip.
Less visual clutter.

High-tack adhesion

Powerful grip on smooth surfaces for clean marine mounting.

Silicone-painted surfaces*

Adheres to silicone-painted finishes. Check the exact coating before use.

Fully transparent

A clear bond that lets carefully finished details stand out.

A discreet 1 mm profile

PET carrier with pressure-sensitive acrylic adhesive on both sides.

No primer required

Skip the separate primer step on compatible, clean and dry surfaces.

Saltwater + sun resistance

Built for mounting details exposed to the marine environment.

*Test adhesion on the exact coating. Silicone foul-release systems require separate compatibility evaluation.

A CLOSER LOOK INSIDE

Three layers. One clear bond.

Decorative componentSmooth mounting surface
1 mm total tape thicknessLayer illustration · not to scale
  1. 01

    Acrylic adhesive

    Pressure-sensitive adhesive on the first side.

  2. 02

    PET carrier

    Transparent polyester film at the core.

  3. 03

    Acrylic adhesive

    Pressure-sensitive adhesive on the second side.

A white motor yacht on coastal water in warm evening light

SALT. SUN. CHANGING TEMPERATURES.

Ready for the coast.
Clear by design.

Saltwater resistant

For marine mounting details exposed to saltwater.

Sunlight resistant

Acrylic bonding for details that see the sun.

−10 °C to +150 °C

Stated temperature resistance in service.

Match the bond to the surface, exposure and component.

A hand presses a dark decorative component onto a polished marine mounting surface

THE SURFACE MAKES THE DIFFERENCE

Strong grip.
Know your finish.

High-tack adhesion on smooth surfaces. Plan your mounting around the actual finish, its condition and the intended exposure.

Silicone-painted surfaces*

Bonds to silicone-painted finishes. Run a sample test on the exact coating before committing to the installation.

Silicone foul-release hull coatings are a separate category. Confirm compatibility with FasVix for your coating and conditions.

PREPARE. POSITION. PRESS.

A clean install starts with preparation.

Hands peel the red liner from clear tape on a metal component beside a yacht
  1. 01

    Clean + dry

    Remove salt, wax, polish and grease with a finish-compatible cleaning process. Let the surface dry fully.

  2. 02

    Apply the tape

    Dry-fit the component. Apply tape to its back and press evenly for full contact.

  3. 03

    Peel + position

    Remove the release liner without touching the adhesive. Align the component carefully.

  4. 04

    Press + allow to build

    Apply firm, even pressure. Follow the product guidance for bond build before service.

MARINE ACRYLIC DOUBLE-SIDED TAPE

The technical essentials.

Original FasVix Marine Mounting Tape packaging
MARINE MOUNTING TAPEPack shown: 8 mm × 1 mm × 3 m
Carrier
PET film
Adhesive
Pressure-sensitive acrylic, both sides
Total tape thickness
1 mm
Appearance
Fully transparent
Primary surfaces
Smooth, compatible surfaces
Coated finishes
Silicone-painted surfaces*
Primer
Not required
Temperature resistance
−10 °C to +150 °C
Exposure resistance
Saltwater + sunlight

Temperature resistance is distinct from application temperature. Confirm exposure duration and application conditions in the current product data.

*Test adhesion on the exact coating. Silicone foul-release systems require separate compatibility evaluation.

BEFORE YOU MOUNT

Good questions. Clear answers.

Does it need a primer?

No primer is required on compatible surfaces. Cleaning and drying remain essential for good adhesive contact.

Will it bond to silicone paint?

The product is specified for silicone-painted surfaces. Test the exact coating; silicone foul-release systems need separate evaluation.

Can I use it below the waterline?

Saltwater resistance alone does not establish continuous-immersion suitability. Ask FasVix to assess an underwater application.

Does −10 °C mean winter installation?

The stated range is temperature resistance in service. Check the application temperature and bond-build guidance separately.

BRING US YOUR MARINE MOUNTING PROJECT

Your boat. Your details.
Your clear advantage.

Share your surfaces, component size and exposure conditions. Let’s find the right mounting approach.

FasVix Marine Mounting Tape