FASVIX GREEN PE VAPOUR-BARRIER TAPE
SEAL THE JOINT.
FACE THE SEASONS.
Summer. Winter. Water. Moisture.
Temperature changes. One material
decision for your membrane connections.
winter use
moisture resistant
temperature changes
to −15 °C*
A SMALL GAP
IS STILL A GAP.
Look closely at membrane overlaps, perimeters and transitions before they disappear behind the finish.
SAME BUILDING. DIFFERENT SEASONS.
change.Plan the
connection.
*−15 °C refers to cold resistance, not application temperature. Check installation and exposure conditions separately.
WATER & MOISTURE
RESISTANCE.
For compatible membrane connections.
Confirm the exposure conditions for your project.
SEAL THE LAYER.
BEFORE YOU HIDE IT.
Behind plasterboard. Around windows. Across the membrane joints.
01BEHIND THE PLASTERBOARD
- Insulation
- Membrane
- Green sealing tape
- Plasterboard
Join the membrane before the lining covers the detail.
Illustrative external-wall assembly.02AROUND THE WINDOW FRAME
- Window frame
- Foam inside gap
- Membrane
- Sealing tape
later
Connect frame to compatible membrane before the trim goes on.
Foam fills the gap. The sealing layer connects across it.03MEMBRANE OVERLAPS
- Continuous tape
- Sheet overlap
Connect one sheet to the next.
Centre the tape on the supported sheet overlap.04CORNERS & LAYER CONNECTIONS
- Wall membrane
- Sealing connection
Keep the connection continuous through the corner.
Check the detail before the next layer goes on.CHECK THE DETAIL BEFORE YOU CLOSE THE WALL.
Illustrative details. Confirm tape width, substrate compatibility and the specified building system before use.
THE MATERIAL
BEHIND THE GREEN LINE.
carrier
reinforcement
adhesive
WHERE THE DETAIL MATTERS.
PREPARE. POSITION. PRESS. INSPECT.
Use a clean, dry surface. Follow the membrane system’s instructions.
- 01Prepare
- 02Position
- 03Press
- 04Inspect
THE ESSENTIALS.
- Product
- Green PE Vapour-Barrier Tape
- Construction
- PE / textile fibres / thermoplastic adhesive
- Cold resistance
- Down to −15 °C*
- Selection
- Confirm membrane and exposure.
FAQ
Can it be applied in any weather?+
Check application conditions separately from service resistance. Apply to clean, dry, compatible surfaces.
Can it be bonded directly to window foam?+
The illustration shows foam inside the gap, not as the tape’s sole bonding surface. Confirm the proposed frame-to-membrane connection, contact surfaces and window system with FasVix before use.
What should I confirm before ordering?+
Share the membrane, substrate, joint detail and exposure conditions. Confirm the suitable format and installation requirements for your project.
PLAN THE SEAM.
NOT THE REWORK.
Send us your membrane, substrate
and application detail.
Tell us about your connection +
LET’S CHECK
THE DETAIL.
Include your membrane type, the adjoining surface, where the connection sits and how the finished assembly will be exposed.
We’ll use your project details to prepare a product-specific quotation.
