ESD Warning Floor Tape Make the ESD boundary unmistakable.
Bring the warning to the floor. Mark the entrance and perimeter of designated ESD work areas with a recognisable visual cue in a 50 mm × 33 m roll. This tape identifies a zone; it does not provide electrical protection.
- Visible ESD boundary
- Recognisable warning pattern
- Clear entrance cues
- Continuous boundary lines
Visible ESD boundary
Show where a designated ESD area starts on the floor itself.
Recognisable warning pattern
Give entrances and work-cell edges the same visual cue.
Clear entrance cues
Place the warning where people enter the designated work area.
Continuous boundary lines
Cut the 33 m roll to follow the layout of your work cells and access points.
Part of your ESD plan
Use alongside the site's grounding, training and ESD-control procedures.
Put the warning where people enter
Designated work areas
Outline the entrance to an ESD work area so the change in zone is visible.
Production boundaries
Carry the same cue around selected production cells.
Warehouse zones
Mark the edge of designated ESD zones within a warehouse.
Equipment access areas
Show where an equipment access area has ESD procedures.
Service corridors
Bring the warning to corridor approaches to designated zones.
Facility route marking
Repeat the marking along the route into an ESD-controlled area.
Application and material illustrations. See product details for the listed formats.
ESD warning floor-tape format
ESD warning pattern listing · Floor-tape format
- ESD warning pattern listing
- Floor-tape format
- 50 mm width
- 33 m roll length
- Cut-to-length roll
A clear line within your ESD plan
Define the ESD zone
Use the boundary established in your site's ESD-control plan.
Prepare the floor
Clean and dry the intended marking area and test adhesion.
Mark the entrance
Make the warning easy to see at designated access points.
Maintain the message
Inspect the marking and replace damaged or unreadable sections.
Product details
ESD Warning Floor Tape
Choose a listed format and include the reference in your enquiry.
Check availability ↗| Format | Colour | Reference |
|---|---|---|
| 50 mm x 33 m | ESD warning pattern | 000095-01EAN 3830044411930 |
Tell us the format, quantity and what you are working on. We will help with the next step.
The details.
Answered.
Have a different application in mind? Tell us what you are working on.
Ask FasVix ↗Where should ESD warning tape go?
Mark entrances and boundaries defined by your site's ESD plan, where people need to recognise the zone before crossing it. The tape is a visual cue; grounding and ESD controls still provide the protection.
What size is available?
The roll is 50 mm × 33 m.
Can I use it on any floor?
Clean and dry the intended floor, test adhesion on its actual finish, and consider traffic before laying out the whole boundary.
Give every entrance the same cue
Use the 50 mm × 33 m roll to mark designated ESD boundaries while your grounding and ESD procedures do the protective work.
