STANDARD DOUBLE-SIDED CLOTH TAPE
TWO SIDES.
ONE CLEAN
FINISH.
The fixing belongs between the materials.
Not on top of your work.
Hand-tearable, cotton-fibre reinforced tape for compatible indoor mounting. Tear a strip. Position it. Press your materials together.
25 & 50 mm widths · Four catalogue formats · FasVix Standard
01 / THE FINISH COMES FIRST
GOOD WORK.
NO FIXING ON SHOW.
A visible staple. A bead of glue beyond the edge. A mounting method that becomes part of the design. Your fixing should support the finish, not compete with it.
Keep the fixing inside.
Two adhesive faces sit between the materials. For suitable indoor joints, the mounting stays out of sight.
Put adhesive where you want it.
Work with a defined strip instead of dispensing liquid glue. Position the tape along the line you want to join.
Take a strip. Keep moving.
The hand-tearable construction lets you separate a working length directly from the roll. No scissors needed for a basic tear.
02 / BUILT FOR HANDS-ON WORK
LESS FUSS.
MORE
MAKING.
Keep your attention on the piece in front of you. Tear a length, place the strip and keep the second adhesive face protected until you are ready to join.
03 / WHAT IS IN THE ROLL?
CLOTH AT
THE CORE.
ADHESIVE
ON BOTH SIDES.
This is a double-sided mounting tape reinforced with cotton fibres. The white release liner protects an adhesive face until application. Each part has a different job.
- 01 / Cotton-fibre carrier
- The textile reinforcement within the tape.
- 02 / Two adhesive faces
- Make contact with the two materials being joined.
- 03 / White release liner
- Peel away when you are ready to expose the protected adhesive.
04 / FROM THE WORKBENCH TO THE FINISHED PIECE
MAKE THE MATERIALS
THE MAIN EVENT.
Explore the job, then check the exact surfaces. These are application ideas for compatible materials—not a promise that every textile, coating or plastic will bond alike.
Show the fabric.
Hide the fixing.
For indoor display and craft projects where a visible fastener would interrupt the finish. Discuss fabric-to-panel mounting, trims and presentation work.
Check: fibre shedding, surface finishes and any tension pulling at the edge.
Tell us about your materials ↗
LEATHER & COMPONENTS
Keep the detail in place.
Discuss positioning and mounting compatible leather or textile parts during craft and assembly work. Confirm suitability for the complete process, not just the first touch.
TEXTILE JOINING & CONVERTING
Think beyond a single panel.
Cloth tapes are also used for textile joining and splicing. Tell us the web material, tension and process conditions before choosing this article.
Application images are illustrative concepts, not customer projects or performance tests.
A BETTER STARTING QUESTION
NOT “HOW STICKY?”
“WHAT AM I JOINING?”
The surface, the force and the environment decide whether a tape fits the job. Start there.
THE RANGE / PICK YOUR FORMAT
SAME IDEA.
YOUR SIZE.
A narrow edge or a wider contact area. A short job or repeated work. Start with the dimensions your application needs.
ERP 000037-01 · EAN 3830044413187
Catalogue formats. Availability, order quantities and delivery are confirmed with your quotation. Product visual shows the 25 mm × 50 m label concept.
06 / GIVE THE BOND A GOOD START
TEAR. PLACE.
PEEL. PRESS.
The strip is only part of the job. Clean surfaces, careful alignment and full contact make the application worth doing properly.
- 01
Prepare both surfaces.
Use clean, dry, sound surfaces. Remove dust and grease with a method suitable for the material. Test a small area first.
- 02
Tear and position.
Take the required length. Apply the exposed adhesive face to the first surface without touching the adhesive more than necessary.
- 03
Press, then peel.
Press the strip firmly along its length. Remove the release liner when you are ready to bring the second material into contact.
- 04
Align and press again.
Bring the materials together with care. Apply firm, even pressure over the whole joint. Validate the bond before putting it into service.
Need an application temperature, a waiting time or a load limit? Ask for guidance for the selected article and your exact job. Do not borrow those values from a different tape.
07 / THE PRODUCT, PLAINLY
KNOW WHAT
YOU’RE ORDERING.
Double-sided cloth tape is a construction, not an all-purpose performance rating. Here are the product details behind this page.
Ask a technical question ↗- Catalogue name
- Easy-Tear Double-Sided Cloth Tape
- Range
- FasVix Standard
- Construction
- Double-sided, textile-reinforced
- Carrier
- Cotton fibres
- Handling
- Hand-tearable
- Release liner
- White
- Intended setting
- Indoor mounting
- Listed widths
- 25 mm / 50 mm
- Listed formats
- 25 mm × 10 / 25 / 50 m; 50 mm × 10 m
08 / BEFORE YOU COMMIT
STRAIGHT
ANSWERS.
A few details now can save a rework later.
Is this the Easy-Tear Double-Sided Cloth Tape?
Yes. This is the same FasVix Standard product listed in the catalogue as Easy-Tear Double-Sided Cloth Tape. The shorter name describes the construction: adhesive on both sides of a cotton-fibre carrier. It is not a foam tape or a single-sided cloth repair tape.
Can I tear it without scissors?
Yes. Hand-tearability is a listed feature of this product. Tear off the length you need before positioning it. Use a suitable cutting tool if your job requires a particularly precise edge or repeatable length.
Will it stick to my fabric, wood or plastic?
Those material families are listed as intended mounting applications, but the exact surface matters. A coated fabric, loose-fibre textile, unfinished wood and soft plastic can behave very differently. Test both sides of the proposed joint on representative pieces. Tell us about any paint, finish or plasticiser before ordering.
Does it come off without leaving glue?
Do not assume residue-free or damage-free removal. That performance has not been confirmed for this FasVix article. If removal matters, test it after the intended contact time on the actual finish. Specify temporary use in your inquiry so the tape can be selected accordingly.
Can I use it for carpets or flooring?
Double-sided cloth tapes are used in this category, but carpet backing, floor finish, traffic and removal requirements must be checked for the selected article. Ask us before using this tape on finished flooring, stairs or public walkways. The application images are illustrations, not certified installation examples.
Is it for outdoor, wet or high-temperature use?
This page positions the product for indoor mounting. Outdoor exposure, water resistance and application or service temperatures need article-specific confirmation. The words ‘cloth tape’ do not establish any of those ratings.
How much weight will it hold?
There is no verified load rating to quote for this article. The materials, bonded area, direction of force, temperature and time all matter. A tape that feels sticky is not automatically a rated load-bearing connection. Do not use an unverified joint for structural, overhead or safety-critical mounting.
Can I get samples, bulk quantities or another size?
Send the format, quantity and two materials through the inquiry form. FasVix can confirm sample availability, order quantities, delivery and any alternative converting options. The four formats shown here are the current catalogue entries, not a live stock promise.
FASVIX STANDARD / LET’S MAKE IT FIT
WHAT ARE
YOU JOINING?
Tell us the two surfaces, the quantity and how the finished piece will be used. We’ll help you check the fit and quote the right roll.
Request a quote
No guesswork on price or lead time. Ask us.
About the product information & category research
FasVix product details and roll formats come from the current catalogue. Category references below explain cloth-tape construction and selection; their performance values are not specifications for this FasVix product. Generated product and application visuals are concepts, not test evidence.
