Black/Yellow Floor-Marking Tape Give busy floors a clear signal.
Busy floors need clear decisions. Use a black-and-yellow line to define work zones, highlight transitions and make your site layout easier to read. Supplied in a 50 mm × 33 m roll.
- Clear boundary lines
- Black and yellow pattern
- Define the work zone
- Cut to your layout
Clear boundary lines
Show where a work area begins or a route changes.
Black and yellow pattern
Black and yellow contrast draws attention to the marked edge.
Define the work zone
Use the 50 mm line to give selected boundaries a consistent visual presence.
Cut to your layout
Plan straight runs, corners and short warning details from the 33 m roll.
Repeat the same visual cue
Carry one recognisable pattern through the facility's marking plan.
One visual cue across the facility
Warehouse aisles
Keep aisle edges and pedestrian routes easy to recognise.
Production work cells
Outline work cells so their boundaries read at a glance.
Loading areas
Call attention to selected loading-area edges and transitions.
Service corridors
Carry the same marking pattern into service routes.
Threshold details
Highlight a change in area at suitable thresholds.
Facility access zones
Mark access-zone edges with the same black-and-yellow cue.
Application and material illustrations. See product details for the listed formats.
Black-and-yellow floor-marking format
Floor-marking tape format · Black-and-yellow pattern
- Floor-marking tape format
- Black-and-yellow pattern
- 50 mm width
- 33 m roll length
- Cut-to-length roll
Plan it, lay it, keep it legible
Map the boundary
Agree the meaning and position of the marking with your team.
Prepare the floor
Remove dirt and grease and allow the floor to dry.
Lay a consistent line
Position the 50 mm tape along your planned route and press it down evenly.
Review traffic wear
Inspect corners and high-contact areas and replace worn sections.
Product details
Black/Yellow Floor-Marking Tape
Choose a listed format and include the reference in your enquiry.
Check availability ↗| Format | Colour | Reference |
|---|---|---|
| 50 mm x 33 m | Black / Yellow | 000097-01EAN 3830044413163 |
Tell us the format, quantity and what you are working on. We will help with the next step.
The details.
Answered.
Have a different application in mind? Tell us what you are working on.
Ask FasVix ↗What size is the roll?
The roll is 50 mm × 33 m.
Where should the warning line go?
Use it at work-zone boundaries, route changes and selected edges where the black-and-yellow cue has a clear meaning to your team. It is a visual marking, not an anti-slip strip.
How do I keep the line looking clear?
Start with a clean, dry floor, test the actual coating, and inspect corners and high-contact points for wear. Check suitability for vehicle traffic before marking a full route.
Make the line easy to follow
Carry one black-and-yellow marking pattern across entrances, aisle edges and work zones with a 50 mm × 33 m roll.
