Skip to main content
Fasvix Tapes
Built to stick.Engineered to perform.Control panel
FasVix premium anti-slip range

Black Anti-Slip Tape Add grip to every important step.

Give steps, entrances and busy walkways a textured strip where feet land. Choose a 25 mm or 50 mm width; both black rolls are 5 m long.

  • Two practical widths
  • Cut to the spot
  • Low-key black finish
  • Grip at key points
Black Anti-Slip Tape

Two practical widths

Choose 25 mm for a narrow tread detail or 50 mm for a wider strip.

Cut to the spot

Trim a 5 m roll into lengths that fit your steps and access points.

Low-key black finish

A dark finish adds texture without dominating the floor design.

Grip at key points

Place the textured strip where people need more secure footing.

Easy upkeep

Inspect strips during cleaning and replace sections with worn surfaces or lifting edges.

01 / In use

Where an extra grip strip makes sense

Stair details

Stair details

Add a strip across a sound tread where feet regularly land.

Facility entrances

Facility entrances

Mark the first step inside a busy entrance after checking the surface and exposure.

Warehouse walkways

Warehouse walkways

Give pedestrian routes a grip detail at selected changes in level.

Work-cell access

Work-cell access

Place strips at entry and exit points around work areas.

Service corridors

Service corridors

Repeat a simple layout at corridor transitions and thresholds.

Loading-area approaches

Loading-area approaches

Target walking approaches; consider dirt, cleaning and traffic before installation.

Application and material illustrations. See product details for the listed formats.

02 / A closer look

Two roll formats, one black finish

25 mm x 5 m roll — product code 000017-01 · 50 mm x 5 m roll — product code 000018-01

  • 25 mm x 5 m roll — product code 000017-01
  • 50 mm x 5 m roll — product code 000018-01
  • Black colour
  • Supplied as rolls
Black Anti-Slip Tape: material detail illustration
03 / Getting started

From clean surface to lasting contact

01

Check the surface

Assess the access area, footwear and expected exposure before choosing the strip.

02

Prepare the landing area

Remove dirt and residues, then let the sound surface dry.

03

Position and press

Cut to the planned length and press the full strip into contact without lifting edges.

04

Inspect during use

Check edges and wear as part of normal cleaning; replace damaged sections.

04 / Find your format

Product details

Black Anti-Slip Tape

Black Anti-Slip Tape

Choose a listed format and include the reference in your enquiry.

Check availability ↗
Listed product variants
FormatColourReference
25 mm x 5 mBlack000017-01EAN 3830044413156
50 mm x 5 mBlack000018-01EAN 3830044413149

Tell us the format, quantity and what you are working on. We will help with the next step.

Before you start

The details.
Answered.

Have a different application in mind? Tell us what you are working on.

Ask FasVix ↗
Which width should I choose?

Choose 25 mm for a narrow detail or 50 mm for a broader strip. Both rolls are 5 m long.

Where should I place the strips on stairs?

Place them on clean, sound treads where feet land, with each edge fully supported. Test the actual surface before laying out the full staircase.

Is this suitable for a shower or barefoot area?

Check the product against the specific wet and barefoot conditions before use. Keep any installed strip clean and replace it if the surface wears or an edge lifts.

Make the next step feel more secure

Choose the width that fits your tread or walkway detail, then cut the 5 m roll to suit your layout.